This wraparound Lithonia Lighting 4-foot-square two-light T8 fluorescent ceiling fixture exudes a high light level suitable for storage rooms, offices, or retail applications. Its hinged design allows easy cleaning and the instant-on ballast eliminates annoying flickering and humming. This fixture features a diffuser with side prisms to control brightness and bottom prisms to reduce lamp images. To help the environment, it is energy efficient, and it can also reduce your energy costs. For surface or stem mounting, it requires a minimum of two single stem hangers. This wraparound light is backed by a 1-year limited manufacturer's warranty. The bulb is not included.

User Reviews about Lithonia Lighting SB 232 120 GESB Two-Light T8 Fluorescent Ceiling Fixture - White

I replace 4 bulb fixture with this. It is very easy to install, but you have to prepare your own screw and bolt. Little bit darker than expected but I believe it will be bright if I switch to other bulb.
It took me 30 minute to install including taking old one down. -- Easy to install

This light is good looking, manufactured decently well and is pretty easy to install. The materials used are the minimum quality that would do the job(thinnest metal, least reinforcement etc), but that said, they *are* sufficient. The main drawback is the packaging it is shipped in. It arrived in the shelf display packaging and no actual shipping packaging. The box was crushed and edge areas of the lens were cracked off. Some of the metal was bent. It is usable, and nothing that can be seen from the ground but it is a pretty shoddy way to ship. -- Good Light, Bad Packaging

Shipped promptly, love the light. Easy install, but bezel was broken in shipping. Still usable, it was bought to put in my father-in-law's workshop but if it was for for a customer's house, I would have returned it. According to feedback of others this not an uncommon occurance. I took the chance knowing it was going into the shop, so for me it was OK. -- Good light, bad packaging

The ballast in my old fixture melted. I took one look at the ball of wires coming from it and decided that I didn't want to tackle replacing it. This fixture solved my problem handily at a price little more than the cost of a replacement ballast alone. Installation took about fifteen minutes. No mounting hardware comes with the fixture. In my case, I needed two wood screws to attach it to a plywood soffit.

A word to the wise: pay attention to the wattage of the fluorescent tubes in your fixture. The supported bulb sizes are printed on the ballast. I think the reason my ballast melted was that I had been using two 40-watt bulbs when the maximum supported configuration was two 32-watt bulbs. -- Excellent Value